Questions, or ready to book? Call (289) 680-5383.
Air Filtration in Smithville, ON — Picking a Filter Your Furnace Can Pull Air Through
Reasons to Choose Environmental
-
Family-owned, founded and serving Smithville since 2014
-
TSSA-registered heating contractor
-
Rheem Pro Partner, Mitsubishi Electric MEQ Certified Dealer and Daikin Comfort Pro
-
Up to 12 years parts and labour warranty
-
Rated 5.0 on Google
-
Free quotes and financing on new systems
Air filtration in Smithville starts with the filter already sitting in your furnace. It catches particles out of the air the fan pushes past it. A better filter can improve what you breathe, and it can also choke a furnace that was never built to pull air through it.
What a Furnace Filter Takes Out of the Air in Your Smithville Home
A furnace filter only cleans the air that goes through the furnace. The fan pulls air out of the rooms, through the return ducts, across the filter and back out the vents, and anything the fan never moves is never filtered.
What it catches is fine particulate, the dust too small to see. In Canadian homes, Health Canada measured average levels under 15 micrograms per cubic metre without smokers, and under 35 where someone smokes. (1)
Neither number is the useful part. What matters is that indoor fine particulate should at a minimum be lower than the air outside your house, so a higher reading indoors means something indoors is making it. (1) The sources named are smoking, cooking and cleaning. (1)
Cooking is the source in almost every house, and on the rural edges of West Lincoln a wood stove is a second one. The filter only gets it once it is in the air, which is why the range hood does more than the filter while you are cooking.
Choosing a MERV Rating Your Furnace Can Pull Air Through
MERV is the number printed on the filter, and it says how much of the fine dust the filter catches. Health Canada’s guidance for cleaner air spaces recommends a MERV value of 13 or more to remove fine particulate matter. (2)
The same guidance adds the condition almost nobody quotes with it: the system has to be capable of handling the pressure drop from a MERV 13 or 14 filter. (2) Three things decide whether yours can:
- how deep the filter slot is
- how old the furnace is, and what its fan can move
- how fast your house loads a filter
A tighter filter is harder to pull air through. A fan that cannot move enough air across it delivers less warm air to your rooms and works harder doing it. A MERV 13 in a one-inch slot on a twenty-year-old furnace can leave the back bedroom cold.
Depth is the part people miss. One inch of filter has far less surface for air to pass through than a four-inch media cabinet, so the same MERV rating in a deeper cabinet is easier on the fan. Most older Smithville furnaces have the one-inch slot.
So we look at the furnace before recommending a rating rather than after. Mike Peddle holds a TSSA Heating Contractor registration, and the furnace the filter sits in is the appliance we work on. For indoor air quality equipment we fit GeneralAire and Aprilaire.
How Often to Change a Furnace Filter in a Smithville House
Your owner’s manual first, because how often depends on your model. Natural Resources Canada says the manual will tell you how often to change the filter for your furnace, and that if it has been more than three months, it is time to do it anyway. (3)
Three months is the backstop, not the schedule. A clean filter improves airflow and helps warm air get out of the vents, which is why a blocked one costs you heat. (3)
Some houses reach the backstop early. A gravel road out toward West Lincoln, a dog, a wood stove or a week of renovation dust all load a filter faster than a quiet house in town. Pull yours in month two, and if daylight no longer shows through it, change it in month two.
Wildfire smoke overrides all of that. The cleaner air spaces guidance notes that smoke can overload a filter quickly, so during a smoke event check yours rather than waiting for the date you had in mind. (2)
Filtration and Purification Are Two Different Jobs
A filter catches particles as the air passes through it. Gases and smells are not particles, so they go straight through the filter and out the vents with the air.
That is why some air cleaners add an activated carbon or absorbent filter aimed at gases, such as those given off by paint, cleaners and new furniture. (4) There is a limit Health Canada states directly: no widely used performance rating system exists for filters designed to remove gases. (4) A MERV number tells you nothing about them, because MERV measures particles.
Health Canada adds a safety line: avoid devices that produce ozone, because ozone can harm your health. (4)
The order of operations is Health Canada’s rather than ours: the best ways to improve indoor air are to remove the source and to ventilate with clean outdoor air. (4) If the smell has a source you can take out of the house, taking it out beats filtering around it.
What Affects Air Filtration Cost in Smithville
Five things about the house and the system move the quote:
- how deep the filter slot is, since a one-inch slot and a media cabinet are different jobs
- whether the furnace can pull air through a tighter filter (2)
- how many returns the system filters at, because some houses have more than one
- how easy the filter is to reach once it is in
- how fast the house loads a filter: pets, a gravel road, a wood stove
A house on a gravel road outside Caledonia and one on a paved street in Smithville can run the same furnace and still not be the same job.
Air Filtration Questions From Smithville Homeowners
What MERV rating should I use in a Smithville home?
MERV 13 or more, if the furnace can pull air through it. The cleaner air spaces guidance recommends 13 or more for fine particulate matter, and says in the same place that the system has to handle the pressure drop. (2)
How often should I change my furnace filter?
Check your owner’s manual first, and treat three months as the outside limit. Natural Resources Canada says if it has been longer than that, change it. (3)
Will a furnace filter get rid of smells and gases?
No. Particles are what a filter catches, and gases are not particles. Carbon filters aim at gases, but Health Canada says there is no widely used rating system for them. (4)
Do air filtration systems actually work?
They lower the particles in the air that goes through the furnace. Health Canada rates two things above them: removing the source, and ventilating with clean outdoor air. (1)(4)
Can I fit a better filter myself?
Changing a filter is a homeowner job. Whether your furnace can take a tighter one is the question to ask first, and that depends on the slot depth and the fan.
Book an Air Filtration Visit in Smithville
Call the office with the make of the furnace and the size printed on the filter you are pulling out. Environmental Heating & Cooling has been family-owned in Smithville since 2014, and we cover Grimsby, Beamsville, Caledonia and West Lincoln as well.
If the problem turns out to be damp, a smell or dust that keeps coming back, the category page covers duct cleaning, humidity and the rest of the air quality work.
References
- Health Canada, Guidance for fine particulate matter (PM2.5) in residential indoor air, canada.ca
- Health Canada, Guidance for Cleaner Air Spaces during Wildfire Smoke Events, canada.ca
- Natural Resources Canada, Winter is coming: Top tips to heat your home for less, natural-resources.canada.ca
- Health Canada, Using a portable air cleaner to improve indoor air, canada.ca
Request Service
"*" indicates required fields
Maintenance Plans
The Greener Homes Club
Our exclusive Greener Homes Club is designed for environmentally and budget conscious clients like you, who are keen on minimizing energy use and extending equipment lifespan.
It’s a small step contributing to a more sustainable future, ensuring lasting comfort for everyone under your roof.
-
Priority Service
-
20% Repair Discount
-
Waved Diagnostic
-
Renewal Rewards
-
and More!
Join the The Greener Homes maintenance club today and begin protecting the longevity of your HVAC equipment.
Why Environmental Heating & Cooling?
Honest Advice, No Pushy Sales
We look at your house before we recommend anything, and we tell you when a repair makes more sense than a new system. In Mike’s words: “no pushy sales tactics, no selling people things they don’t need.” Our customers notice, and we’re rated 5.0 on Google.
Licensed, and Backed by Rheem, Mitsubishi and Daikin
We’re a TSSA-registered heating contractor, a Rheem Pro Partner, a Mitsubishi Electric MEQ Certified Dealer and a Daikin Comfort Pro. We install “products we’d be comfortable putting in our own homes,” as Mike puts it. New systems come with up to 12 years parts and labour, and the exact coverage is written on your quote.
Maintenance That Catches Problems Early
A yearly visit finds small problems, like a dirty flame sensor or a cracked heat exchanger, before they shut your system down. Members of our Greener Homes Club get their maintenance on a schedule, and we waive the diagnostic fee on their repair calls.